Integration · 7 min read

Clickatell integration guide

Clickatell connects supported sms providers workflows to LucidCP. Use this checklist to configure, link and validate the module before production traffic.

Verified against the current LucidCP interface
Site Settings screen used to configure Clickatell in LucidCP
Step 1 — Open Site Settings in the English admin workspace and select Clickatell.
Modules & Gateways screen used to connect Clickatell in LucidCP
Step 2 — Map the saved Clickatell connection to the relevant workflow from Modules & Gateways.
01

Procedure

Step-by-step

  1. 01

    Prepare the provider account

    Confirm that your Clickatell account is active and create the provider account, API secret and approved sender identity. Use a test or sandbox environment when the provider offers one.

    Clickatell configuration in the real LucidCP interface
    Step 1 of 7 · Confirm that Clickatell is listed in Developer → Modules & Gateways.Select the preview to inspect the full-resolution interface.
  2. 02

    Open the configuration area

    Go to Admin → Site Settings → SMS and select Clickatell.

    Clickatell configuration in the real LucidCP interface
    Step 2 of 7 · Open the Provider Modules page and locate the Clickatell card.Select the preview to inspect the full-resolution interface.
  3. 03

    Enter and protect credentials

    Copy values exactly, keep TLS verification enabled and never place production secrets in screenshots, tickets or browser-side code.

    Clickatell configuration in the real LucidCP interface
    Step 3 of 7 · Expand the real Clickatell card and enter its provider credentials.Select the preview to inspect the full-resolution interface.
  4. 04

    Test the connection

    Use LucidCP’s connection test where available. Resolve authentication, network or permission errors before linking the integration.

    Clickatell configuration in the real LucidCP interface
    Step 4 of 7 · Use the connection or delivery test shown in the provider settings.Select the preview to inspect the full-resolution interface.
  5. 05

    Connect the workflow

    Associate the notification events that may send SMS. Save the configuration and re-open it to verify the selected mapping.

    Clickatell configuration in the real LucidCP interface
    Step 5 of 7 · Connect the saved provider to the related LucidCP workflow.Select the preview to inspect the full-resolution interface.
  6. 06

    Run acceptance checks

    Perform a single test message to a controlled number. Confirm both the LucidCP record and the provider-side result.

    Clickatell configuration in the real LucidCP interface
    Step 6 of 7 · Run the acceptance check in the related admin or customer workflow.Select the preview to inspect the full-resolution interface.
  7. 07

    Monitor after launch

    Review activity logs, module queue, failed jobs and provider logs during the first production transactions.

    Clickatell configuration in the real LucidCP interface
    Step 7 of 7 · Review the activity log after enabling the provider.Select the preview to inspect the full-resolution interface.
02

Checklist

Best practices

  • Start with the smallest API permission set and expand only when a documented action requires it.
  • Rotate provider credentials regularly and immediately after a suspected leak.
03

Reference

Module details

Integration
Clickatell
Category
SMS Providers
Availability
Included with licence
Was this guide helpful?Need more detail? Tell the support team which step you reached.
Contact support

Get Started

Choose your plan, get your license, and complete setup in minutes.

View Pricing

Hi! Need help with plans, installation, or licensing?

Help Center Open a Support Ticket Integrations